Product Description
Product Description
16139823/1613982300
Type: Gear Flex Coupling
Applied: Atlas Copco
Certificate: iso 9001.
Coupling Selection Method
- Torque – power [kW] • Speed [r/min]
- Type of equipment and application
- Shaft diameters
- Shaft gaps
- Physical space limitation
- Special bore or finish information
Coupling Features
- Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
- Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
- The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
- Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
- Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
- Reliable operation, stable performance, convenient installation, disassembly and maintenance.
Detailed Photos
Determining the right type of flexible coupling starts with the following analysis of the application:
- Prime mover type (motor, diesel engine, etc.) of the drive side of the system
- Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
- Drive system inertia related to prime mover inertia (data available from equipment supplier)
- vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
- Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
- Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
- whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.
We are able to offer a wide range of special couplings, which are based on your samples or drawings.
Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CZPT type Coupling Spare and other products, widely used in industrial applications.
All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
More Products for Choose
| Coupling | Coupling |
| 1613949900 | 1613982300 |
| 1614873800 | 1613958500 |
| 165710800 | 165710800 |
| 162357100 | 1619646700 |
| 1615678500 | 165714700 |
| 1615682500 | 1604076100 |
| 1613982300 | 1626510900 |
Tips:
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.
Company Profile
Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.
Company team
Our company is located in the beautiful coastal city of HangZhou,is a professional manufacturer of air compressor filters and separators,
We repect the enterprise spirit of “steadyfastness,hard work and responsibility” and creat a good corporate environment based on the operation principle of “Integrity,reliability and innovation”.
With the survival idea of “perfect technology, good service and excellent quality”,
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.
We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.
Packaging & Shipping
FAQ
Q1. What is your product range?
A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.
Q2. Is customized filter or OEM available?
A: Yes, just offer your required specifications and drawings.
Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.
Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.
Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.
Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.
| Customized: | Non-Customized |
|---|---|
| Standard Component: | Standard Component |
| Type: | Gear Flex Coupling |
| MOQ: | 1unit |
| Lead Time: | Aroud 3-5 Working Days After Order Confirmed |
| Package: | PP Bag Inside, Inner Carton, Export Carton Outside |
| Customization: |
Available
| Customized Request |
|---|
Functions and Modifications of Couplings
A coupling is a mechanical device that connects two shafts and transmits power. Its main purpose is to join two rotating pieces of equipment together, and it can also be used to allow some end movement or misalignment. There are many different types of couplings, each serving a specific purpose.
Functions
Functions of coupling are useful tools to study the dynamical interaction of systems. These functions have a wide range of applications, ranging from electrochemical processes to climate processes. The research being conducted on these functions is highly interdisciplinary, and experts from different fields are contributing to this issue. As such, this issue will be of interest to scientists and engineers in many fields, including electrical engineering, physics, and mathematics.
To ensure the proper coupling of data, coupling software must perform many essential functions. These include time interpolation and timing, and data exchange between the appropriate nodes. It should also guarantee that the time step of each model is divisible by the data exchange interval. This will ensure that the data exchange occurs at the proper times.
In addition to transferring power, couplings are also used in machinery. In general, couplings are used to join two rotating pieces. However, they can also have other functions, including compensating for misalignment, dampening axial motion, and absorbing shock. These functions determine the coupling type required.
The coupling strength can also be varied. For example, the strength of the coupling can change from negative to positive. This can affect the mode splitting width. Additionally, coupling strength is affected by fabrication imperfections. The strength of coupling can be controlled with laser non-thermal oxidation and water micro-infiltration, but these methods have limitations and are not reversible. Thus, the precise control of coupling strength remains a major challenge.
Applications
Couplings transmit power from a driver to the driven piece of equipment. The driver can be an electric motor, steam turbine, gearbox, fan, or pump. A coupling is often the weak link in a pump assembly, but replacing it is less expensive than replacing a sheared shaft.
Coupling functions have wide applications, including biomedical and electrical engineering. In this book, we review some of the most important developments and applications of coupling functions in these fields. We also discuss the future of the field and the implications of these discoveries. This is a comprehensive review of recent advances in coupling functions, and will help guide future research.
Adaptable couplings are another type of coupling. They are made up of a male and female spline in a polymeric material. They can be mounted using traditional keys, keyways, or taper bushings. For applications that require reversal, however, keyless couplings are preferable. Consider your process speed, maximum load capacity, and torque when choosing an adaptable coupling.
Coupling reactions are also used to make pharmaceutical products. These chemical reactions usually involve the joining of two chemical species. In most cases, a metal catalyst is used. The Ullmann reaction, for instance, is an important example of a hetero-coupling reaction. This reaction involves an organic halide with an organometallic compound. The result is a compound with the general formula R-M-R. Another important coupling reaction involves the Suzuki coupling, which unites two chemical species.
In engineering, couplings are mechanical devices that connect two shafts. Couplings are important because they enable the power to be transmitted from one end to the other without allowing a shaft to separate during operation. They also reduce maintenance time. Proper selection, installation, and maintenance, will reduce the amount of time needed to repair a coupling.
Maintenance
Maintenance of couplings is an important part of the lifecycle of your equipment. It’s important to ensure proper alignment and lubrication to keep them running smoothly. Inspecting your equipment for signs of wear can help you identify problems before they cause downtime. For instance, improper alignment can lead to uneven wear of the coupling’s hubs and grids. It can also cause the coupling to bind when you rotate the shaft manually. Proper maintenance will extend the life of your coupling.
Couplings should be inspected frequently and thoroughly. Inspections should go beyond alignment checks to identify problems and recommend appropriate repairs or replacements. Proper lubrication is important to protect the coupling from damage and can be easily identified using thermography or vibration analysis. In addition to lubrication, a coupling that lacks lubrication may require gaskets or sealing rings.
Proper maintenance of couplings will extend the life of the coupling by minimizing the likelihood of breakdowns. Proper maintenance will help you save money and time on repairs. A well-maintained coupling can be a valuable asset for your equipment and can increase productivity. By following the recommendations provided by your manufacturer, you can make sure your equipment is operating at peak performance.
Proper alignment and maintenance are critical for flexible couplings. Proper coupling alignment will maximize the life of your equipment. If you have a poorly aligned coupling, it may cause other components to fail. In some cases, this could result in costly downtime and increased costs for the company.
Proper maintenance of couplings should be done regularly to minimize costs and prevent downtime. Performing periodic inspections and lubrication will help you keep your equipment in top working order. In addition to the alignment and lubrication, you should also inspect the inside components for wear and alignment issues. If your coupling’s lubrication is not sufficient, it may lead to hardening and cracking. In addition, it’s possible to develop leaks that could cause damage.
Modifications
The aim of this paper is to investigate the effects of coupling modifications. It shows that such modifications can adversely affect the performance of the coupling mechanism. Moreover, the modifications can be predicted using chemical physics methods. The results presented here are not exhaustive and further research is needed to understand the effects of such coupling modifications.
The modifications to coupling involve nonlinear structural modifications. Four examples of such modifications are presented. Each is illustrated with example applications. Then, the results are verified through experimental and simulated case studies. The proposed methods are applicable to large and complex structures. They are applicable to a variety of engineering systems, including nonlinear systems.
editor by CX 2023-05-17
China 3J -14 J Air compressor spare parts gear elastomer coupling coupling adapter
Composition: Jaw / Spider
Versatile or Rigid: Flexible
Common or Nonstandard: Normal
Substance: rubber
Kind: NM COUPLING
Application: Mining Machiner
Floor Therapy: Blackening
Entire body Content: rubber
PACKING: Carton Box
Bore type: Finished Bore
Packaging Information: standard carton box
Port: ZheJiang port
3J -14 J Air compressor spare parts gear elastomer coupling benefit :
Glue couplings from 3J–14J. A complete of twelve models. Globe regular components, common.
Products are widely utilised in a variety of sorts of air compressors, pumps, gearbox transmission solenoid valve physique tr580 tr690 solenoid printing and dyeing equipment and other equipment.
The content is specifically designed higher-energy rubber, higher temperature resistant, oil resistant, Agricultural Farm Wheel Drive Gearmotor Center Pivot Irrigation Method Component Gearbox for Valley Sprinkler Zimmatic Centre use resistant, and replaces imported original components.
All items are in stock, a one elastomer stock is enough, eighteen Many years Experience HangZhou Mechanical Engineering OEM Plastic MC Nylon PEEK Equipment make sure you feel free of charge to place an purchase. There are only a handful of sets of coupling stocks, and if the huge order shipping and delivery period demands to be negotiated.
What Is a Coupling?
A coupling is a device that connects two shafts together. It transmits power from one to the other and is used to join rotating equipment. It can also allow for some degree of misalignment and end movement. It is used in mechanical engineering and manufacturing. To learn more about couplings, read this article.
Mechanical connection between two objectsThe present invention relates to a method and assembly for forming a mechanical connection between two objects. The methods of this invention are suitable for connecting both solid and hollow objects. For example, the method can be used to make mechanical connections between two cylinders. This method is particularly useful for connecting two cylinders that are positioned near each other.
Absorbs vibration
A coupling insert is a part of a vehicle’s drivetrain that absorbs vibrations. These inserts are designed to prevent couplings from moving out of phase. However, the coupling inserts themselves can wear out and need to be replaced. Universal joints are an alternative if the coupling is out of phase by more than one degree. In addition, internal bearings in the coupling need to be lubricated and replaced when they begin to show signs of wear.
Another embodiment of the invention includes a flexible coupling 25 that includes rearwardly-extending lugs that extend toward the coupling member 23. These lugs interdigitate with corresponding lugs on the coupling member 23. They are spaced circumferentially. A first elastic member 28 is interposed between lugs 26 and 27, and is adapted to yield in a counterclockwise direction. As a result, it absorbs torsional vibrations.
Blocks heat transfer
Thermal coupling occurs when a solid block is thermally coupled to the air or fluid passing through it. The amount of heat transferred through a solid block depends on the heat transfer coefficients of the materials. This paper presents a numerical model to understand how heat transfers through different block materials. This work also describes the thermal resistance network for a one-dimensional block.
In some cases, thermal coupling increases the heat transfer mechanism. As illustrated in FIG. 1D, a heatpipe coupler 112 couples two heatpipes 110-1 and 110-2. This configuration allows the pipes to be coupled to the heat source and to the condenser. In addition, the heat pipe couplers may have bellows at the ends to help facilitate linear motion.
Thermal coupling is achieved by ensuring that at least one block is made of a material with a lower thermal expansion coefficient than the annulus. Ideally, the block’s mean thermal expansion coefficient is at least twenty percent lower than the annulus’s mean thermal expansion coefficient. This ensures that the thermal coupling between the two parts is as efficient as possible.
Another type of thermal coupling is achieved by using flexible elements. These are often washers or springs. These components allow the blocks to maintain physical contact with the post 55, which means that the heat transfer is more efficient even at higher temperatures. The flexibility of these elements also makes it possible to choose an element that will not impede assembly.
Protects rotating equipment
A reliable, long-lasting coupling system can reduce the risk of damage to rotating equipment. Designed to protect against torque overload and wear, Voith torque-limiting couplings provide outstanding safety and reliability. As a result, they can deliver maximum performance and minimize equipment downtime. In addition to their long-term benefits, these solutions are ideal for applications where safety and reliability are of paramount importance.
A good coupling provides many advantages, including the ability to transmit power, compensate for axial movement, and absorb shock. It is essential to choose the proper coupling for your application based on the basic conditions of your rotating equipment. For example, if you have two shafts with parallel rotation axes, you should choose a parallel coupling. Otherwise, you should use an angular coupling.
Torque-limiting couplings can also provide protection for rotating equipment by disengaging at a specific torque level. This protects the drive shaft from undergoing catastrophic failure. Torque limiters are particularly helpful for high-value equipment. By preventing catastrophic failure, you can avoid expensive repairs and minimize equipment downtime.
Coupling guards are easy to install and provide effective protection for rotating equipment. These covers are made of sheet metal bent to fit over the shaft. They are durable and easy to remove when necessary. This type of guard can prevent employees from catching their hands, tools, or loose clothing on motor coupling components.
editor by czh 2023-02-15
China Ec210b Excavator Parts Drive Gear Coupling SA7117-30180 coupling alignment
Item Description
Thorough Photos
Other goods
WHY Decide on US
one.A lot more than ten many years expertise in excavator spare components discipline
2.We are specialists in CZPT excavator areas and have in this industry considering that 2571
3.Unique parts from suppliers with ensured and higher high quality
four.Massive assortment of spare components scope for excavators
five.Have parts in inventory and give you quick lead time
6.Realistic and aggressive price tag
Company Profile
HangZhou Junchi construction machinery Co., Ltd. is situated in HangZhou logistics capital of China. We are a seller specialised in excavator components, excavator components legitimate accessories a single-quit shopping centre. We supply all kinds of Volvo/LG/Personal computer excavator spare parts for all varieties of excavator designs.
It is convenient for you to buy all areas for Volvo/LG/Personal computer excavators with each other.
JUNCHI is our personal model, which integrates our business experience in excess of the a long time to supply you with items with far better rates and larger top quality. We are fully commited to meeting all your needs for excavator elements and offering you with the most best excavator areas remedy. Use the very best quality and the most competitive cost to acquire lengthy-phrase cooperation with consumers.
We sincerely hope to cooperate with all people close to the planet and welcome your visit to our organization, In the in the meantime, we feel that through our continuous perfecting support method and strategy, you can have the world’s greatest goods with the world’s very first – class services!
About Us
Factory
Our Warehouse
Packing and shipment
Our Benefit:
1 We have several very certified engineers and sale supervisors, with extensive and certain understanding in the sale, and repair of construction machines, the revenue group prides itself on its knowledge of heavy machinery coupled with exemplary right after product sales service .
two We have our transfer warehouse for all the spare elements, the warehouse is about 2000 sq. meter, hold about USD5,000,000.00 spare areas at any time.
3 we have large-efficient logistics procedure technique,which guarantee cargo is on time and right.
four our solution is all in excess of the globe.
five we hope create the potential together with every single Volvo/LG/Laptop machine consumers.
FAQ
one.If I only know the excavator model, but can not offer parts No., what should I do ?
If possible, you can provide pictures of outdated products, nameplate or size of the parts.
two.How can I pay the order?
We can receive payment through T/T, L/C, Western Union.
three.When will get the items after I place order?
Once we receive your payment, we will deliver the goods within 24 hours if not in stock , we will communicate with you before placing orders.
4.How can I do if there is something wrong with the items?
First of all ,we can assure the quality of our products ,if you really found something wrong ,pls provide pictures for us and we will check. After it is confirmed, pls return to us , we will offer the correct item.
5.What is your main products ?
We are specialized in excavator spare parts, such as engines/or components, undercarriage parts, digital parts, hydraulic areas , covering components, attachments and so on. If you need other excavator parts, we also can supply as your requirements
|
US $28 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 6 Months |
| Type: | Pistons |
| Application: | Excavator |
| Certification: | CE, ISO9001: 2000 |
| Condition: | New |
###
| Samples: |
US$ 28/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
|
US $28 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 6 Months |
| Type: | Pistons |
| Application: | Excavator |
| Certification: | CE, ISO9001: 2000 |
| Condition: | New |
###
| Samples: |
US$ 28/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
Functions and Modifications of Couplings
A coupling is a mechanical device that connects two shafts and transmits power. Its main purpose is to join two rotating pieces of equipment together, and it can also be used to allow some end movement or misalignment. There are many different types of couplings, each serving a specific purpose.
Functions
Functions of coupling are useful tools to study the dynamical interaction of systems. These functions have a wide range of applications, ranging from electrochemical processes to climate processes. The research being conducted on these functions is highly interdisciplinary, and experts from different fields are contributing to this issue. As such, this issue will be of interest to scientists and engineers in many fields, including electrical engineering, physics, and mathematics.
To ensure the proper coupling of data, coupling software must perform many essential functions. These include time interpolation and timing, and data exchange between the appropriate nodes. It should also guarantee that the time step of each model is divisible by the data exchange interval. This will ensure that the data exchange occurs at the proper times.
In addition to transferring power, couplings are also used in machinery. In general, couplings are used to join two rotating pieces. However, they can also have other functions, including compensating for misalignment, dampening axial motion, and absorbing shock. These functions determine the coupling type required.
The coupling strength can also be varied. For example, the strength of the coupling can change from negative to positive. This can affect the mode splitting width. Additionally, coupling strength is affected by fabrication imperfections. The strength of coupling can be controlled with laser non-thermal oxidation and water micro-infiltration, but these methods have limitations and are not reversible. Thus, the precise control of coupling strength remains a major challenge.
Applications
Couplings transmit power from a driver to the driven piece of equipment. The driver can be an electric motor, steam turbine, gearbox, fan, or pump. A coupling is often the weak link in a pump assembly, but replacing it is less expensive than replacing a sheared shaft.
Coupling functions have wide applications, including biomedical and electrical engineering. In this book, we review some of the most important developments and applications of coupling functions in these fields. We also discuss the future of the field and the implications of these discoveries. This is a comprehensive review of recent advances in coupling functions, and will help guide future research.
Adaptable couplings are another type of coupling. They are made up of a male and female spline in a polymeric material. They can be mounted using traditional keys, keyways, or taper bushings. For applications that require reversal, however, keyless couplings are preferable. Consider your process speed, maximum load capacity, and torque when choosing an adaptable coupling.
Coupling reactions are also used to make pharmaceutical products. These chemical reactions usually involve the joining of two chemical species. In most cases, a metal catalyst is used. The Ullmann reaction, for instance, is an important example of a hetero-coupling reaction. This reaction involves an organic halide with an organometallic compound. The result is a compound with the general formula R-M-R. Another important coupling reaction involves the Suzuki coupling, which unites two chemical species.
In engineering, couplings are mechanical devices that connect two shafts. Couplings are important because they enable the power to be transmitted from one end to the other without allowing a shaft to separate during operation. They also reduce maintenance time. Proper selection, installation, and maintenance, will reduce the amount of time needed to repair a coupling.
Maintenance
Maintenance of couplings is an important part of the lifecycle of your equipment. It’s important to ensure proper alignment and lubrication to keep them running smoothly. Inspecting your equipment for signs of wear can help you identify problems before they cause downtime. For instance, improper alignment can lead to uneven wear of the coupling’s hubs and grids. It can also cause the coupling to bind when you rotate the shaft manually. Proper maintenance will extend the life of your coupling.
Couplings should be inspected frequently and thoroughly. Inspections should go beyond alignment checks to identify problems and recommend appropriate repairs or replacements. Proper lubrication is important to protect the coupling from damage and can be easily identified using thermography or vibration analysis. In addition to lubrication, a coupling that lacks lubrication may require gaskets or sealing rings.
Proper maintenance of couplings will extend the life of the coupling by minimizing the likelihood of breakdowns. Proper maintenance will help you save money and time on repairs. A well-maintained coupling can be a valuable asset for your equipment and can increase productivity. By following the recommendations provided by your manufacturer, you can make sure your equipment is operating at peak performance.
Proper alignment and maintenance are critical for flexible couplings. Proper coupling alignment will maximize the life of your equipment. If you have a poorly aligned coupling, it may cause other components to fail. In some cases, this could result in costly downtime and increased costs for the company.
Proper maintenance of couplings should be done regularly to minimize costs and prevent downtime. Performing periodic inspections and lubrication will help you keep your equipment in top working order. In addition to the alignment and lubrication, you should also inspect the inside components for wear and alignment issues. If your coupling’s lubrication is not sufficient, it may lead to hardening and cracking. In addition, it’s possible to develop leaks that could cause damage.
Modifications
The aim of this paper is to investigate the effects of coupling modifications. It shows that such modifications can adversely affect the performance of the coupling mechanism. Moreover, the modifications can be predicted using chemical physics methods. The results presented here are not exhaustive and further research is needed to understand the effects of such coupling modifications.
The modifications to coupling involve nonlinear structural modifications. Four examples of such modifications are presented. Each is illustrated with example applications. Then, the results are verified through experimental and simulated case studies. The proposed methods are applicable to large and complex structures. They are applicable to a variety of engineering systems, including nonlinear systems.
editor by czh 2023-01-25
Sun made in China – replacement parts – in Jambi Indonesia Gear for Planetary Carrier Stamping Material in High Precision Class with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 diverse branches. For much more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
| HangZhou helix spur ring pinion solar equipment wheel |
| With carton box outside the house, plastic bags inside of with carton board independent each other |
| forty five-60 times right after payment |
As a membership of HangZhou high correct gears enterprises, HangZhou HangZhou EPT EPT Co., Ltd. is specialised in planning, producing and selling all varieties of tough & soft toothed gears, established in 2004 and found in Zhangzhuang industrial park. With far more than 150 staff and masking an location in excess of 16000 square meters, the once-a-year generation of business can achieve more than two million items gears, mo EPT utilised in automobile oil pump, motorcar, reducer, and equipment box. The organization was awarded as ZheJiang Province Higher Technology business, and company honoring contracts and standing by status. A Grade taxpaying company and an organization of AAA credit rating grade.
We have a variety of te EPT devices and equipped more than 200 sets lathes, including all varieties of hobbing machines, grinding equipment, shaping equipment, shaving equipment and so forth. The gears with brand “HangZhou” handed ISO9001: 2000 good quality system in 2008. We have numerous well-known clients in domestic and abroad, like Brevini from Italy, FAW Fuao firm, HangZhou Jinling Intenal-Combustion Engine Fittings Co., Ltd., HangZhou Qingqi Group, ZHangZhoug Buyang Team and so on.
HangZhou inherits the business philosophy of “good faith, enthusiasm, dream and motion”, entirely utilizes sources superiority, continuously pioneers and invents, absorbs hello-tech abilities, introduces sophisticated creation & inspection products and administration strategies and repeatedly enhances top quality of HangZhou with regards to technological innovation, generation, high quality and revenue and so forth., in addition, the business often stays core competitive energy in the market place.
The use of first gear manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our organization and the shown substitute areas contained herein are not sponsored, approved, or created by the OEM.
High sales made in China – replacement parts – in Orenburg Russian Federation Quality Power Transmission Worm Gear Reducer for Roller Mill with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Higher Top quality Power Transmission worm equipment reducer for roller mill
Our Gearbox has several things for your deciding on and we can produce as per your drawing or sample to meet your particular ask for
1. Large output torque
two. Secure, reliable, cost-effective and durable
3. Secure transmission, quiet operation
4. High carrying ability
five. Substantial modularization layout, could equip with a variety of outer energy input conveniently. Identical equipment kind could equip with a variety of energy motor. It is easy to realize the combination and junction among each device sort
six. Transmission ratio: Fantastic division, vast scope. The combined device kind may form extremely huge transmission ratio, i. E. Output quite low rotary velocity.
7. Type of set up: The situation to be mounted is not restricted.
8. Large power, compact the box body of substantial strength ca EPT iron, gear and equipment shaft adapts the gasoline carbonization, quenching and fantastic grinding method, therefore the bearing capability of unit quantity is substantial.
9. Prolonged daily life: Under the condition of appropriate variety chosen(including deciding on suitable procedure parament ) standard procedure and maintenance, the daily life if primary areas velocity reducer(apart from donning areas)need to not be less than 20000 hrs. The donning areas incorporate lubricating oil, oil seal and bearing.
10. Lower noise: Because major components of velocity reducer are processed, and tested critically, consequently the noise of pace reducer is lower.
eleven.Our gear box have reached the progress intercontinental stage, can replace the identical sort of products imported.
Business Info
HangZhou EPT Business Co., Ltd. is a specialized supplier of a full selection of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined components and so on.
Thanks to our sincerity in providing be EPT services to our customers, comprehending of your demands and overriding feeling of responsibility towards filling buying specifications, we have acquired the tru EPT of consumers worldwide. Having gathered treasured expertise in cooperating with international customers, our merchandise are marketing properly in the American, European, South American and Asian marketplaces.Our products are produced by modern computerized machinery and equipment. In the meantime, our items are produced according to large top quality specifications, and complying with the global sophisticated normal standards.
With many years’ expertise in this line, we will be dependable by our rewards in competitive price tag, one-time supply, prompt reaction, on-hand engineering support and very good soon after-sales solutions.
Moreover, all our production procedures are in compliance with ISO9001 standards. We also can layout and make non-regular merchandise to meet up with customers’ particular demands. Top quality and credit are the bases that make a corporation alive. We will supply be EPT services and substantial quality items with all sincerity. If you need to have any details or samples, please contact us and you will have our soon reply.
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first products manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the detailed replacement parts contained herein are not sponsored, approved, or created by the OEM.
MW made in China – replacement parts – in Ludhiana India Brand Steel Gear Rack M3 30X30X1000 with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 diverse branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
EPT Manufacturer Metal Equipment RACK M3 30X30X1000
We exported gear rack in large quantity to Europe, The usa, Australia, Brazil, South Africa, Russia and so forth. There is regular equipment rack accessible and also unique gear rack as per your drawing or samples. Our gear racks made by CNC machines
one) Our gear rack is developed as per DIN standards by CNC device
two) The pressure angle: 20°/14.5°
3) Module: M0.4-M36/DP1-DP25
four) The greatest length can be 3500mm
5) The substance can be Q235, C45, SS304, SS316L, aluminum, copper, nylon and so on.
Our equipment racks are employed for window machine, engraving device, raise equipment, opener rack, CNC machine, auto, industrial usage so on.
The use of authentic gear manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our firm and the shown substitute parts contained herein are not sponsored, authorized, or created by the OEM.
CNC made in China – replacement parts – in Catania Italy Machining Bevel Steel Gear Ring with Turning with ce certificate top quality low price
We – EPG Team the bigge EPT Chain and agricultural gearbox factory in China with 5 various branches. For a lot more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
We can make all types of gears in accordance to customers drawing and technical specs ,specializing in non-common items
>>Main Merchandise
Spur Gear
Planetary Equipment
Metal Gears Tiny
Gear Wheel
Ring Equipment
Gear Shaft
Helical Gear
Pinion Equipment
Spline Shaft .
Specifications:
one. Suitable for many kinds of transmission method.
two. Material and precision can be as requirements:
metal, plastic, brass and so forth.
3. Processing:
cast,casting,heattreatment,or quenching and tempering carburization.
four. We have complete gear machining equipments: gear hobbing device, shaving machine, equipment
shaper, equipment grinding device and heat therapy heart,all of the generation treatment are strictly
controlled by ourselves, we can sure the final merchandise to meet up with your demands.
five. Each processing, strictly high quality control:
ISO9001:2008.
six. Can manufacture all types of gears.
A Professional on Drawing analysis, Assembly speaking about, system auditing, EPT & QC.
| Machining Equipments | CNC middle, CNC milling machine, CNC turning device, CNC lathes,5 axis equipment and many others. |
| Materials | one. Stainless Metal: SS201, SS303, SS304, SS316, SS416, SS420 two. Metal:C45(K1045), C46(K1046),C20 3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200 (CuZn37), C28000(CuZn40) 4. Bronze: C51000, C52100, C54400, and so forth five. Iron: 1213, 12L14,1215 6. Aluminum: Al6061, Al6063 7.OEM in accordance to your ask for |
| Processing | Creating drawing, Opening mould/tooling, Precision machining (forging, Machining, Hobbing, Milling, Shaping, Shaving, Grinding, Warmth treatment.) Inspection, Packing and transport |
| QC : | Specialists self-examine in production, last-check prior to package deal by expert Top quality inspector |
| Warmth Therapy Strategy | Carburizing, Induction, Flame, Nitriding, etc. |
| Primary Devices | NC equipment hobbing machines, NC Equipment Shapers (Gealson, Moude), NC lathe, NC equipment Shaving devices, NC gear millling, Nc gear grinding Equipment. |
| Area End | Anodize, Plating, Brushing, Sharpening, Blackened, Powder coating, Sandblasting, Laser engraving and so on. |
| Inspection Equipment | CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, Pin gauge, Caliper gauge, Move meter, Pass meter and so forth. |
| Benefit | Quality fir EPT Services excellent , Sophisticated products,Experienced staff, EPT testing equipment |
| Application | Health care parts Machine parts Aerospace equipment parts Ships equipment areas Electrical parts Furnishings parts Kitchen equipment Telecommunications, etc. |
The use of original equipment manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our organization and the detailed replacement components contained herein are not sponsored, authorized, or created by the OEM.
Gear made in China – replacement parts – in Joao Pessoa Brazil Injection Molding Module 1 10mm-Face Plastic Nylon Spur Gears with ce certificate top quality low price
We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Equipment injection molding Module 1 10mm-encounter plastic nylon Spur Gears
Area: As your need
Substance: Steel / aluminum / brass / iron / zinc / alloy
Any EPT substance and dimension is dependent on customers’ need.
Usage: EPT / household furniture / toy / woodboard / wall
Euipment: CNC device
Testing tools: Projector
| Content | Stainless steel, copper, brass, carbon steel, aluminum (according to customer’s requirement. |
| Surface Treatment | Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying, the heat disposing, hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated, blue black zinc-plated, rust preventive oil, titanium alloy galvanized, silver plating, plastic, electroplating, anodizing etc. |
| Main Products | Precision screw,bolt, nuts,fastener,knob,pins, bushing, sleeve,gear, stamping parts,washer,gasket,plastic molding injection parts,standoff,CNC machining service,accessories etc. |
| Producing Equipment | CNC machine , automatic lathe machine,stamping machine,CNC milling machine,rolling machine,lasering,tag grinding machine etc. |
| Management System | ISO9001 – 2008 |
| Available Certificate | RoHS, SGS, Material Certification |
| Testing Equipment | Projecting apparatus, Salt Spray Test, Durometer, and Coating thickness tester , 2D projector |
| Lead time | ten-15 working days as usual,It will based on the detailed order quantity. |
| Managing Returned Goods | With quality problem or deviation from drawings |
| Delivery of Samples | By DHL,Fedex,UPS, TNT,EMS^^ |
| Warranty | Replacement at all our cost for rejected products |
| Main Markets | North America, South America, Eastern Europe , West Europe , North Europe, South Europe, Asia |
| How to order | * You send us drawing or sample |
| * We carry through project assessment | |
| * We give you our design for your confirmation | |
| * We make the sample and send it to you after you confirmed our design | |
| * You confirm the sample then place an order and pay us 30% deposit | |
| * We start producing | |
| * When the goods is done, you pay us the balance after you confirmed pictures or tracking numbers. | |
| * Trade is done, thank you!! | |
| Purposes | Toy,Automotive, instrument, electrical equipment, household appliances, furniture, mechanical equipment, daily living equipment, electronic sports equipment, light industry products, sanitation machinery, market/ hotel equipment supplies, artware etc. |
The use of unique tools manufacturer’s (OEM) component figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the outlined alternative parts contained herein are not sponsored, authorized, or made by the OEM.
Steering made in China – replacement parts – in Jambi Indonesia Gear for Toyota RAV-4 Xa11 96-00 44250-42100 44250-42020 44250-42021 4425042100 4425042020 4425042021 with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
| AELWEN NO. | AEL-5537 | Brand | “AELWEN” or Customer’s Brand name |
| Connected Cars | TOYOTA RAV-4 XA11 96-00 | ||
| OE Info | 44250-42100 44250-42571 44250-42571 442557100 4425042571 4425042571 | ||
| XIHU (WE EPT LAKE) DIS.-Travel | Left Hand | ||
| EPT Details | Rack-and-pinion steering equipment, with no tie rod, Hydraulic | ||
Our factory is specialized in researching and developing steering equipment considering that 2003.
We have acquired ISO/TS16949 Quality Administration Method Certification.
We have specialist production tools & assembly line and sophisticated assembly testing
facility for steering valves and steering equipment. Our major markets are Europe and the Americas.
We connect wonderful significance to the high quality of personnel and staffs. “Major the technology, advanced design, well timed shipping and delivery, credit cooperation” is our basic principle.
Aelwen men and women will by no means alter the pursuit of much better quality and further growth.
The use of first equipment manufacturer’s (OEM) part numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our company and the shown substitution parts contained herein are not sponsored, accepted, or created by the OEM.
Best China manufacturer & factory china in Dasmarinas Philippines manufacturer competitive price farm machinery parts cotton picker spindle gear for JD cotton picking machine With high quality best price
If you are intrigued in any of our merchandise or would like to discuss a possible buy, make sure you truly feel free to get in touch with us.
Overview
Rapid Information
- Guarantee:
-
one.5 many years
- Relevant Industries:
-
farms
The worm is made of casehardened quenched metal, with ground-on enamel sides, and the wheel is produced of DIN (GZ-CuSn 12 Ni2) centricast bronze, melted on metal. Due to the top quality of these two elements mechanical features, this series provides superb functionality and lower noise levels.
- Soon after Guarantee Provider:
-
Video technological assistance
- Local Service Location:
-
canada, turkey
- Showroom Place:
-
Egypt
- Online video outgoing-inspection:
-
Provided
- Equipment Take a look at Report:
-
Presented
- Marketing and advertising Variety:
-
New Solution 2020
- Guarantee of main components:
-
1.5 years
- Core Parts:
-
Gearbox, Gear
- Essential Promoting Factors:
-
prolonged provider life
- Local Support Area:
-
None
- Product Name:
-
Cotton Picker spindle support
- Software:
-
Harverster Device
- Use:
-
Driving Medium
In our company we are aware of the importance of the users’ protection. That is why our PTO’s are developed in accordance to lawful regulations and European directives and bear the CE indication. A key element for safety assurance is the accession in the products’ growth period. By all implies, the users’ understanding about the correct use of a PTO push shaft is vital. This signifies, that every single users’ duty is to read and stick to the protection recommendations.
- MOQ:
-
500
- Shipping time:
-
15
- content:
-
20CrMnTi
- certification:
-
ISO9001
- guarantee:
-
one year
Supply Ability
- Source Capability:
- 200000 Piece/Pieces for each Month
Packaging & Shipping
- Packaging Details
- aggressive value farm equipment areas cotton picker spindle gear for JD cotton choosing machine
80pcs/internal box , one hundred boxes/MDF box
- Port
- Shanghai/Ninbo
-
Direct Time
: -
Quantity(Bags) one – 500 >500 Est. Time(days) 15 To be negotiated
On the internet Customization
Solution Description
| ProducEPG Equipment is located in XiHu Area HangZhou Zhejiang ,China. It is 30km from our manufacturing unit to HangZhou international airport. t Title | Aggressive cost farm equipment areas cotton picker spindle equipment for JD cotton finding equipment |
| Model | L2456N |
| Materials | 20CrMnTi |
| Use | Driving Medium |
| Application | Cotton Picker |
| Certification | ISO9001 |
| Colour | As Picture |
| Supply Time | In 15 Dys |
| MOQ | 10pcs |
| Terms of Payment | T/T or L/C |
Solution Show
Relater Goods
Business Data
Logistics Shipping
1.Q:Are you company or trade firm?In which?
A:We are company which located in HangZhou,ZheJiang China . EPG – one of the largest Agri-Equipment elements manufacturing unit in China .
2.Q:What is your terms of payment ?
A: Payment=10000USD, 50% T/T in progress ,stability before cargo. Irrepealable LC at sight for massive order is substantial.
3.Q:What about delivery time?
A:The supply time depends on merchandise and quantity .If you want to know the precise time. Email us the amount,we will verify the time for you.
4.Q:Is the internet site price the ultimate price tag?
A:No. All the rates are negotiable depending on the quantities.
five.Q:How will you manage item top quality?
A:We strickly manage every single element of manufacturing and every single item is inspected by our QC group before shipping and delivery. Furthermore,our manufacturing is abided by ISO 9001.
six.Q:When can you get the reply?
A:Any inquiries will be replied in 24 hrs.Our sales crew will try our ideal to support you.
